Puch charger Phylion / Joycube 5-pin – 42V 2A – SSLC084V42XH - RAP electric bikes

Phylion-Joycube-SSLC084V42X-5-pin-plastic

Puch charger Phylion / Joycube 5-pin – 42V 2A – SSLC084V42XH

Q: Why is this a 42V charger for a 36V battery?

A 36V/37V lithium-ion e-bike battery is fully charged to approximately 42V. That is why Phylion and Joycube batteries in this category always use a 42V charger.

Original price was: €59,95.Current price is: €44,95.

Original charger

Suitable for 36V batteries with standard & smart BMS

Pay safely afterwards with Billink!

Product specifications

Specification	Description
Brand	Wuxi Sans (OEM manufacturer for Phylion)
SKU	5481-2
EAN	7422246484438
Warranty	12-month manufacturer’s warranty
Output voltage	42V
Output current	2A
Connection (plug)	5-pin round plastic plug (black)
Charging cable length	approx. 2.5m
Weight	approx. 600g
Technology	Suitable for standard/smart BMS

Puch charger for Phylion / Joycube batteries with 5-pin plug

This charger is suitable for various Puch e-bikes with a Joycube JCEB360 / Phylion SF-03 36V battery with a 5-pin black plastic plug. The charger is used for various models (see below) and is suitable for batteries with the following specifications:

36V (and 37V) batteries
Standard BMS
Smart BMS

The charger provides 42V charging voltage at a stable 2A charging current, perfectly suited for 36V Joycube battery systems for Puch with a 5-pin connection.

Original quality from Sans

We supply the original Sans version. Sans is the manufacturer of the chargers also supplied by Phylion and Joycube. This means you are choosing the same technology, reliability, and compatibility as the original charger.

Depending on the version of the original charger, the model number may end in, for example, XH, X, M, or M-01. The XH version from Phylion/Joycube is suitable for both standard BMS and smart BMS systems (see also under alternative product).

Technically, this is the same 42V 2A charger for Phylion and Joycube batteries with a 5-pin plug.

Why a 42V charger belongs with a 36V or 37V battery

Although the battery usually states 36V or 37V, a lithium-ion e-bike battery is fully charged to approximately 42V. This is because the 10 battery cells in series are each charged to a maximum of 4.2V (10×4.2=42V).

That is why Phylion and Joycube batteries in this category always use a 42V charger.

The 2A (2 amps) designation indicates the charging current. This determines how quickly the battery is charged. In practice, charging a 13Ah battery takes an average of about 6 to 7 hours.

Most Phylion/Joycube batteries are not designed for fast charging with higher charging currents. A heavier charger can cause extra wear and shorten the battery’s lifespan.

Charging e-bike batteries & extending lifespan

Correct charging and storage have a major impact on the lifespan of an e-bike battery. By handling battery management wisely, you prevent unnecessary wear and maintain the range for longer.

Read more HERE about correct charging, storage, and maintenance of an e-bike battery.

Charger not working? How to identify the problem

Is the battery no longer charging or does the charger seem defective? It’s not always immediately clear whether the problem lies with the charger or the battery. Possible causes include:

defective plug or connection
fault in the battery
defective charger
problem with the BMS (Battery Management System)

Unsure where the problem lies? Use our self-diagnosis guide and easily find out if the battery or charger needs replacing. Click HERE for the self-diagnosis: (defective charger or battery?).

Alternative product

Suitable for various Phylion and Joycube 36V batteries with a 5-pin black plug, including JCEB360, SF-03, SF-06, and SF-06S.
Original Sans version, identical to the 42V 2A charger supplied by Phylion/Joycube.

This charger replaces models including:

SSLC084V42XH
SSLC084V42X
SSLC084V42M
SSLC084V42M-01
AGLC084V42S (Accell E-series battery)

Frequently Asked Questions

This charger is suitable for various Phylion and Joycube 36V batteries with a 5-pin, black plastic charging plug including models JCEB360, SF-03, SF-06, and SF-06S.

We supply the original Sans version. Sans is the manufacturer of the chargers also supplied by Phylion and Joycube. Technically, this charger is identical to the original version.

A 36V/37V lithium-ion e-bike battery is fully charged to approximately 42V. That is why Phylion and Joycube batteries in this category always use a 42V charger.

This charger replaces models including SSLC084V42XH, SSLC084V42X, SSLC084V42M, and SSLC084V42M-01.

Yes. This charger is suitable for both standard BMS and smart BMS systems from Phylion and Joycube.

Suitable for

This charger is suitable for Puch batteries from the Phylion/Joycube series with a 5-pin round plastic charging plug, including the following models:

E-ballad
E-Folk
E-clubman
Radius
Radius Luxus

Tips for longer battery life

Proper battery management is essential for a long lifespan and years of cycling pleasure.

Principles for good battery management:

The battery stays in the best condition through regular use (charging and discharging). Insufficient use can lead to problems (imbalance between or even defective battery cells) resulting in capacity loss.
The battery wears out through use (= charging/discharging) and through age (= the chemical process in the battery cells).
The battery performs best at a temperature of approximately 25 degrees Celsius. This is where maximum battery capacity is reached.
The battery is best kept in good condition at low temperatures (above freezing point) because this is when the chemical aging process takes place most slowly.
If the battery is empty, it must be charged immediately to avoid deep discharge. Deep discharge occurs when the battery voltage drops below the level at which the battery management system still recognizes the connected charger. This makes charging impossible.

For more information on managing your battery, click HERE.